Boat Features

Manufacturer: Najad

Year: 2003

Hull Material: Fiberglass

Nominal Length: 37.07

Length At Water Line: 32

Length Overall: 37.08

£140,000


2003 Najad 373. "Pelagia" is an outstanding example of Najad's prettiest model! Her equipment has been regularly updated with upgraded navigation, communication equipment and sails. This superbly built and sea kindly yacht is an ideal boat for extended cruising - she is vat paid and part one registered.

New Spray hood and cockpit enclosure covers ordered and due to be fitted October 2021.

New Liferaft fitted 2020.

Yacht Cradle legs transportable type by Yacht and Cradle Legs Company.


Propulsion

Engine Make: Yanmar Model: 4JH3-BE 52 hp Folding Propellor with Spare Fixed Propellor

Interior

  • The first-class interior is handcrafted in selected and unstained African Mahogany, hand polished and varnished to a satin finish.
  • Cupboards and doors in solid Mahogany with profile-milled massive frames. Most of the wood on this boat will have come from the same tree and so the colour match is exceptionally good
  • Saloon The spacious saloon has a large saloon table with folding tabletop and discreet bottle stowage in the centre.
  • Full-length settee on the port side (convertible to sea berth with fitted lee cloth),
  • Two comfortable armchairs to starboard with also with bottle storage between
  • Heating in all cabins (Diesel Eberspacher)
  • Standing headroom of 6’3” in the saloon.
  • Generous bookshelves and cabinets with overhead and side lighting.
  • Top quality upholstery and curtains, in Valuta blue/yellow.
  • The insulated lockers are lined in Mahogany above the berth bottoms.
  • The flooring of varnished teak plywood with holly inlay.
  • Inspection hatches for the bilge and stowage. Headlining of white vinyl covered panels with distinctive Mahogany strips.
  • Grabrail on the starboard side in saloon ceiling & both sides of the companionway. Removable Companionway steps.
  • Fwd facing nav station with desk stowage, cubby holes and draws, midships fwd of heads.
  • Najad fitted carpets (These are not currently onboard)

Galley

  • The L-shaped galley is located amidships allowing free passage between the cockpit and saloon. This is a galley is easy to work in both at sea and in the harbour Separated from the saloon by a half bulkhead with integrated grab rail.
  • Stainless steel twin sinks.
  • Pressure water system with accumulator tank for hot and cold fresh water. Foot pump for manual operation.
  • Single lever tap for hot and cold water.
  • Drinking water has a nature pure filter with a separate tap
  • Gimballed twin burner Smev gas cooker with oven and grill.
  • Fixed gas pipes with remotely controlled shutoff valve between cooker and gas bottle together with manual tap
  • Large work areas in a durable laminate that is easily cleaned.
  • Well insulated fridge,100  lt.suspended baskets and space for standing bottles.
  • Stowage area outboard of sinks.
  • Plenty of storage cupboards for plates, cups and glasses, utilising peg boards to secure crockery.
  • Cupboard under cooker for pans, etc. Wastebasket under the sink. 4 Wooden drawers, one for cutlery.
  • Lights over the work area.
  • Opening porthole above the cooker.
  • Heads to starboard. With wash basin, WC w/ manual pump, H&C pressurised water & shower, good stowage lockers including a heated oilskin locker, Corian surfaces. Located amidships this is a very easy cabin to access at sea

Aft cabin

  • a light and airy cabin with a large double berth to starboard and an upholstered settee to the port, lockers & hanging wardrobe, opening portholes & an opening deck hatch.

Fwd cabin

  • double berths, shelves, cupboards & hanging wardrobe, a seat on the port side, opening portholes & hatch.

Navigation

  • Raymarine C 90W Colour GPS plotter with Navionics Platinum charts
  • Raymarine RD 418HD colour digital radar
  • Digital Yacht AIT 2000 class B AIS fully integrated to chartplotter
  • Raymarine ST60 speed, depth, wind in the cockpit
  • Multi instruments
  • Raymarine autopilot ST 6001plus
  • Additional Raymarine RL72 CRC
  • Raynav 300 repeater plotter.in the cockpit
  • VHF radio deck speakers in the cockpit
  • Stereo speakers from radio/cd player in the cockpit
  • Communications
  • VHF Sailor A1 semi-duplex DSC radio
  • Icom SSB HF radio with SCS pactor modem enabling worldwide sailmail e-mail and weather information
  • Furuno Navtex NX-300
  • Handheld  VHF radio
  • Radio/CD Bluetooth Blaupunkt player with stereo speakers

Electrical

  • 12 volt systems
  • 450AH battery bank with upgrade (2007) smart regulator to 50A alternator c/w
  • DC 4000 battery controller.
  • Ampair (Doughty) Aquair 100 water and air turbine with spare water turbine.
  • 12V 400/1000Watt inverter with cabin outlet.
  • 230 volt shore power with 40A battery charger and 3 pin (UK) sockets in all cabins.
  • 1 x 75 Ah engine battery.
  • 12 volt/80 A alternator.
  • Charging regulator for start and domestic batteries.
  • The cables to a large extent run in conduits. Main switch panel with circuit breakers adjacent to the chart table.

Water and fuel meters, voltmeter. Two alt. three main switches for domestic and engine circuits.

4 x 12 volt socket outlets.

Engine and propulsion

  • Yanmar 4JH3-(B)E, 4-cylinder direct injection, 4-stroke marine diesel with fresh water cooling.
  • Power output at propeller shaft is 53.4 h.p. (39.3 kW at 3 800 r.p.m.) Mechanical reverse gear, type KM4A, a reduction ratio of 2.63:1. Stainless steel propeller shaft in acid resistant steel Stern gland with water lubricated rubber bearing.
  • The "P" bracket is a composite carbon GRP construction which is bonded to the hull (no bolts) rubber, water lubricated cutlass bearing
  • The engine is mounted on four rubber cushions for effective vibration damping
  • Aqua drive flexible mount drive shaft coupling. Twin Racor fuel filters and water separator. `J’ Prop variable pitch (Feathering) propeller.(original fixed 3 blade propeller as spare)
  • Saw blade disc rope cutter
  • Single lever engine control at the pedestal.
  • Instrument panel fitted to starboard recess in cockpit including - rev. counter - engine hour meter - displays for •charging •high engine temperature •low oil pressure - audible warning for oil pressure and engine temperature - switch for instrument lights and alarm test - key starter - electrical stop.
  • Electrical starting motor, 1.2 kW.
  • Wet exhaust with swan neck and effective rubber silencer.
  • Soundproof engine room.
  • The engine is easily accessible for service through a door in the passageway and the removable companionway stairs.

Deck

  • Deck and coachroof are built in sandwich construction in glass fibre reinforced polyester. The colour is white with Carmine red trim line.
  • Hull and deck are laminated together.
  • Strengthened glass fibre laminate beneath stressed areas. Substantial teak capping.
  • The deck the coachroof, both forward and aft, and swimming platform are laid with solid caulked teak.
  • A self-draining locker forward for chain, fenders and warps
  • Two stowage self-draining/vented lazarettes, aft, for gas (3 bottles) and mooring lines.
  • Two 1" (32 mm) internal deck drains on side decks, to prevent streaks on the hull, Teak outboard bracket on pushpit.
  • Harness jackstays to deck mounted `D’ rings.
  • Anchor well with 60 metres of 8mm anchor chain
  • Lewmar Delta anchor (2018)
  • Fortress 37 aluminium anchor
  • Najad 12Kg folding anchor.
  • Lofrans Airon electric anchor windlass with electric remote control. Scooped transom with integrated swimming platform
  • Deck shower.
  • Two stainless steel gateways with stanchions and guardrails.
  • All the teak decks were professionally renovated in 2019 and are in very good order.
  • 4 x 12" (30 cm) mooring cleats, through bolted.
  • 2 x 10" (25 cm) spring cleats midships, through bolted.
  • Twin bow roller fitting with double integrated anchor rollers.
  • Pulpit in acid resistant stainless steel fitted with a teak step.
  • Pushpit in acid resistant stainless steel with two integrated teak "gin seats".
  • Double lifelines with four pairs of stanchions, mounted on fittings that are through bolted to the hull below the teak capping.
  • Folding safety ladder fitted in the integral swimming platform.
  • Mainsheet track with trim lines to the ballbearing car.
  • 2 x 2.5 m long Genoa tracks with 2 x sheet blocks with trim lines adjustable from cockpit.
  • Windscreen of toughened glass in an aluminium frame.
  • 2 x skylights, 1'3"x1'8" (39x50 cm) and 1 x 1'8"x1'8" (50x50 cm).
  • 11 x portholes in the coachroof.
  • 2 x Dorade ventilators with stainless steel protection bars.
  • Teak grab rails on both sides of the coachroof.
  • Flush deck fittings for filling water and fuel tanks.
  • Stainless steel through deck fitting for all mast cables connected below deck.

Cockpit

  • Comfortable, safe cockpit with a large navigation table in high gloss teak behind a fixed windscreen.
  • Seats and the upper side of cockpit coaming are laid in teak. The Curved Helmsman's seat with Najad logo in teak behind the wheel.
  • Teak cockpit table (removable) Teak cup holder
  • Removable teak grating. Steering pedestal with stainless steel protection bar for the compass which also supports the cockpit table.
  • S/steel wheel with hide leather trim - the trim was renewed in 2018 Detachable s/steel lifelines in cockpit sole
  • Two flush pockets in the coamings port and starboard. The starboard one also contains the engine control panel.
  • Raymarine instrumentation is mounted behind the windscreen above the companionway Integrated grab rails are built into the hi-gloss teak side tables in the cockpit.
  • The sprayhood is fitted in a groove to the top edge of the windscreen - the windscreen has grab rails on both sides
  • The sprayhood offers a protected area at the forward end of the cockpit.there is a hide- covered grab handle that runs along the rear edge of the sprayhood
  • The sprayhood extension is zipped to the sprayhood and covers the whole cockpit. A separate, purpose-built, bimini
  • There is a Spacious cockpit locker under the starboard seat with storage for the cockpit table, washboards and a fire extinguisher.
  • Below/behind the cockpit locker, there is space for hot water boiler, fuel tank, and holding tank.
  • A manual bilge pump fitted so that it can be operated from the cockpit with all hatches closed.
  • Two 2" self-drains and draining from seats.

 

Mast Rigging & Sails

  • Fractional rig with twin spreaders and twin lower shrouds.
  • Seldén mast in silver anodised aluminium profile 206/139 mm, height 49'2"(15.00m) above deck, stepped on the coachroof and supported by a galvanised steel pillar, that is placed on the longitudinal and transverse reinforced support beams.
  • 1x19-ply stainless steel wire standing rigging. 8 mm forestay, 7 mm backstay and intermediate shrouds, 10 mm top shrouds and lower shrouds.
  • Stainless steel rigging screws. 7/16" for intermediate shrouds, 3/4" for top shrouds and all others 5/8".
  • Headsail furling system, Seldén Furlex 300S/8, with control line on port side, drawn through blocks on the stanchions and stopper on the cap rail to cockpit.
  • Backstay adjuster, Selden mechanical.
  • Seldén gas strut rod-kicker Topping lift.
  • The mast is fitted with deck light, steaming light Spinnaker equipment halyard etc,
  • One stainless steel, self-tailing halyard winch Andersen 12ST.Stainless steel reefing winch. Stoppers to Genoa and main halyards.
  • Winch handle pocket,
  • Windex and flag halyards.
  • Internal main halyard of 5 mm,133-ply stainless steel wire with Terylene rope end.
  • Internal jib halyard of 6 mm, 133-ply stainless steel wire with Terylene fall.
  • Ample cleats.
  • Stainless steel chain plates, bolted to transverse bulkheads, laminated on both sides to the hull.
  • Seldén boom in silver anodised aluminium profile 171/94 mm with internal outhaul and twin reefing lines with stoppers.
  • Six-to-one mainsheet with ball bearing car on a sheet track, with trim lines. 2 x Anderson stainless steel ST52 Genoa Winches 2 x Anderson stainless steel 28 ST spinnaker winches. Sails
  • Fully battened mainsail in Vectran by Kemp Sails (2013),
  • Performance cruise premium headsail (110%genoa) in tri-radial spectra dacron (Kemp Sails 2013),
  • Hanked matching 110% genoa (as new) allowing twin headsails for downwind sailing c/w two spinnaker poles,
  • Heavy weather jib (as new) with detachable inner forestay, Cruising spinnaker.
  • Three point reefing by Selden with all control lines operated from cockpit through clutches.(two reefs single line system)
  • Kemp `packaway’ stack pack sail cover on the boom . Selden gas power strut and Selden spars. Furlex 308S foresail reefing with twin track forestay.
  • Aluminium rigging screw protection. All rigging professionally inspected and replaced as necessary in 2013 and 2018.

Hull Construction

  • The hull is hand-laid in a sandwich construction of triaxial Rowing with ISO polyester. The surface layer is of NGA gel coat for maximum protection against water penetration. The colour is white with carmine red trim and water lines inlaid in the gel coat. The hull is flow-coated internally.
  • The Lead ballast keel is bolted to a deep sump/stud on the hull The semi-balanced rudder has a half skeg with s/steel heal fitting
  • The antifouling was stripped back to the gel coat (spring 2019) then primed and re- antifouled below the waterline. The underwater section of this boat was inspected by a marine surveyor before being launched (March 2019) and confirms the boat is in very good condition and the work was done to a high standard

Safety and miscellaneous equipment

  • 406 Mhz EPIRB.
  • Ocean safety 6 –man Liferaft.
  • Fire extinguishers in each cabin and fire blanket in galley Remote gas isolation switch.
  • MOB Life Sling,
  • Inflatable danbuoy and ring.
  • Flares, fog horn, powerful searchlight. Jackstays.
  • Firdell radar reflector.
  • Full set of signalling flags (for dressing overall).
  • Ensign staff.
  • Comprehensive ship’s tool kit
  • A comprehensive set of spares (drive belt, pumps, impeller, bulbs, screws etc., filters, winch kits, toilet spares, etc.)
  • Three Andersen locking winch handles.
  • Second spinnaker pole for twin headsails.
  • Selection of blocks.
  • Bolt croppers.
  • Anchoring and motoring cones.
  • Spare mainsail cover.
  • Spare 3 bladed fixed propeller.
  • Emergency tiller.
  • Running rigging, sheets for all sails, mooring warps, preventer, three compensators and
  • 7 fenders.
  • Honwave dinghy with outboard bracket, pump, and oars.
  • Honda outboard engine.
  • Navionics Charts

Fractional rig with twin spreaders and twin lower shrouds. Seldén mast in silver anodised aluminium profile 206/139 mm, height 49'2"(15.00m) above deck, stepped on the coachroof and supported by a galvanised steel pillar, that is placed on the longitudinal and transverse reinforced support beams. 1x19-ply stainless steel wire standing rigging. 8 mm forestay, 7 mm backstay and intermediate shrouds, 10 mm top shrouds and lower shrouds. Stainless steel rigging screws. 7/16" for intermediate shrouds, 3/4" for top shrouds and all others 5/8". Head sail furling system, Seldén Furlex 300S/8, with control line on port side, drawn through blocks on the stanchions and stopper on the cap rail to cockpit. Backstay adjuster, mechanical. Seldén rodkick and topping lift. The mast is fitted with decklight, steaming light and prepared for spinnaker equipment, one stainless steel, selftailing halyard winch Andersen 12ST. Stainless steel reefing winch. Stoppers to Genoa and main halyards. Winch handle pocket, Windex and flag halyards. Internal main halyard of 5 mm, 133-ply stainless steel wire with Terylene rope end. Internal jib halyard of 6 mm, 133-ply stainless steel wire with Terylene fall. Ample cleats. Stainless steel chain plates, bolted to transverse bulkheads, laminated on both sides to the hull. Seldén boom in silver anodised aluminium profile 171/94 mm with internal outhaul and twin reefing lines with stoppers. Six-to-one cut mainsheet with ball bearing car, on a sheet track with trimlines.both Genoa and spinnaker winches.

Mainsail Najad Original with sliding system Bainbridge Sailman or equivalent with pressure sliders and bolt rope on foot in triradial cut, DC Mylar. The mainsail is fitted with sail number, boat number, battens, two reefs, telltales, sailbag and a mainsail cover. The working jib, triradial cut, DC Mylar with telltales and sailbag.


2 x stainless steel selftailing Genoa sheet winches, Andersen 52 ST. 2 x 10" (25 cm) lockable winch handles. 4 x 12" (30 cm) mooring cleats, through bolted. 2 x 10" (25 cm) spring cleats midships, through bolted. Twin bow roller fitting with double integrated anchor rollers for one 20 kg Bruce anchor. Pulpit in acid resistant stainless steel fitted with a teak step. Pushpit in acid resistant stainless steel with two integrated teak seats. Double lifelines with four pairs of stanchions, mounted on fittings that are through bolted to the hull below the teak capping. See separate sketch. Folding safety ladder fitted in the integral swimming platform. Mainsheet track with trim lines to the ballbearing car. 2 x 2.5 m long Genoa tracks with 2 x sheet blocks with trim lines adjustable from cockpit. Windscreen of toughened glass in an aluminium frame. 2 x skylights, 1'3"x1'8" (39x50 cm) and 1 x 1'8"x1'8" (50x50 cm). 11 x portholes in the coachroof. 2 x Dorade ventilators with stainless steel protection bars. Teak grab rails on both sides of the coachroof. Flush deck fittings for filling water and fuel tanks. Stainless steel throughdeck fitting for all mast cables connected below deck.


The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.

The Najad 373, being a modern cruising sailing yacht, meeting the highest performance and layout standards for long coastal and ocean sailing, is the result of many years experience. The Najad 373 has thus been designed with a long sailing waterline and the stern raised out of the water to achieve a small wet area. The broad stern makes room for the spacious aft cabin and the integral swimming platform in the transom for comfort/security as well as increases the stability and the downwind performance. The sharp pointed forebody is designed to prevent the yacht slowing down in rough and heavy sea.


Spacious cockpit with a large navigation table in unvarnished teak below a fixed windscreen. Seats and upper side of cockpit coaming covered in caulked, solid teak. Curved Helmsman's seat with Najad logo in teak intarsia behind the wheel. Removable teak grating. Steering pedestal with stainless steel protection bar for the compass which also supports the cockpit table. Two flush mounted winch handle pockets in the coamings port and starboard. The starboard one also contains the engine control panel. Behind the windscreen and in the cockpit recesses there is space for additional instrumentation. Integrated grab rails are built on to the teak navigation table in the cockpit. The sprayhood is splash proof and fitted in a groove to the top edge of the windscreen so the joint becomes watertight. The sprayhood offers a protected area at the forward end of the cockpit. A sprayhood extension can be fitted to cover the whole cockpit (extra equipment). Spacious cockpit locker under the starboard seat containing cockpit table, washboards and fire extinguisher. Below/behind the cockpit locker, space for hot water boiler, fueltank, holdingtank, etc. Manual bilge pump fitted so that it can be operated from the cockpit with all hatches closed. Two 2" selfdrains and draining from seats.


The firstclass interior is handcrafted in selected and unstained African Mahogany, hand polished and varnished to a satin finish. Cupboards and doors in solid Mahogany with profilemilled massive frames. The insulated mouldings are lined in Mahogany above the berth bottoms. Flooring of varnished teak plywood with holly inlay. Inspection hatches for the bilge and stowage. Headlining of white vinyl covered panels with Mahogany strips.


12 volt, electric system. 2 x 145 Ah domestic lighting battery. 1 x 75 Ah engine battery. 12 volt/80 A alternator. Charging regulator for start and domestic batteries. The cables to a large extent run in conduits. Main switch panel with circuit breakers adjacent to chart table. Water and fuel meters, voltmeter. Two alt. three main switches for domestic and engine circuits. 4 x 12 volt socket outlets.


The L-shaped galley is located amidships allowing free passage between the cockpit and saloon. Separated from the saloon by a bulkhead with integrated grab rail. Stainless steel twin sinks. Pressure system with accumulator tank for hot and cold fresh water. Foot pump for manual operation. Single lever tap for hot and cold water. Gimballed twin burner gas cooker with oven. Fixed gas pipes with remote controlled shutoff valve between cooker and gas bottle. Large work areas in a durable laminate that is easily cleaned. Wellinsulated ice box, 100 lt. incl. refrigeration unit, suspended baskets and space for standing bottles. Stowage area outboard of sinks. Plenty of storage cupboards for plates, cups and glasses, utilising peg boards to secure crockery. Cupboard under cooker for pans, etc. Waste basket under sink. Drawers, one for cutlery. Lights over work area. Opening porthole above cooker.


Yanmar 4JH3-(B)E, 4-cylinder direct injection, 4-stroke marine diesel with fresh watercooling. Power output at propeller shaft is 53.4 h.p. (39.3 kW at 3 800 r.p.m.) Mechanical reverse gear, type KM4A, reduction ratio 2.63:1. 1" (30 mm) propeller shaft in acid resistant steel with flexible connection. Stern gland with water lubricated rubber bearing. 3-blade fixed bronze propeller with shaft anode. Single lever engine control at the pedestal. Instrument panel fitted to starboard recess in cockpit including: - rev. counter - engine hour meter - displays for •charging •high engine temperature •low oil pressure - audible warning for oil pressure and engine temperature - switch for instrument lights and alarm test - key starter - electrical stop. Electrical starting motor, 1.2 kW. The engine is mounted on four rubber cushions for effective vibration damping. Wet exhaust with swan neck and effective rubber silencer. Soundproof engine room. The engine is easily accessible for service through a door in the passageway and the removable companionway stairs.


The hull is handlaid in a sandwich construction of triaxial Rowing with ISO polyester. The surface layer is of NGA gelcoat for maximum protection against water penetration. The colour is white with carmine red trim and water lines inlaid in the gelcoat. The hull is topcoated internally. Below the water line the hull is treated with epoxy primer and antifouling paint.


Deck and coachroof are built in sandwich construction in glass fibre reinforced polyester. The colour is white with Carmine red trim line. Hull and deck are laminated together. Strengthened glass fibre laminate beneath stressed areas. Substantial teak capping. The deck and swimming platform are laid with solid caulked teak. The coachroof, both forward and aft, has a nonslip surface and is prepared with a recess for the flush mounting of teak. A selfdraining locker forward for chain, fenders and warps. Aft, two drained lazarettes for anchor, ropes and gas bottles. Two 1" (32 mm) internal deck drains. Winch brackets on both sides of the cockpit coaming to support both Genoa and spinnaker winches.

© Boat Sales Scotland | DDZ Marine 2021 All Rights Reserved.